|
Jeff Kiesel
Solo 2 National Championships:
- 2006 BP Mazda RX-7
- 2007 EM '58
3ROTOR Sprite
Pro Solo National Championships:
- 2007 M1 (EM) '58
3ROTOR Sprite
Shawn
Kiesel
Solo 2 National Championships:
- 2006 BPL Mazda
RX-7
Car info
2006 RX7 Tube Chassis
Builder: Jeff Kiesel of 7parts
Weight: 1950 (race weight is 2650 with 700 pounds
of Ballast)
Width: 75.5 inches
Wheelbase: 94.5 inches (shortened 1 inch from stock)
Power: 461 HP and 382 to the Wheels at 17.5 PSI
of Boost
Motor:
- 13Brew
- 9.7 high compression rotors
- Aggressive Street port
- Special Internal Modifications
- GT35R turbo
- Tial 52mm wastegate
- Turbo Smart Boost controller
- Turbo Smart BOV
- 7parts Stainless Manifold
- 7parts 3” Race Exhaust
- Motor built by Craig Stevens of 7parts
- 7parts Intercooler
- 7parts 52mm Inlet Restrictor (class rules)
Drivetrain:
- Extreme Duty ACT Clutch (6 puck unsprung)
- Jerico 5spd Road Racing Gearbox from Taylor
Race
Engineering
- Custom Aluminum Driveshaft
- Winters Quick Change Independent Rear End
(4.6 gear in there
now)
- Custom Axles
- Aluminum engine mounts
Ignition/Fuel/Engine Management:
- Stack Dash Display
- Microtech LT12s Engine Management System
- (4) Bosch Coils
- Aeromotive Fuel Pump and Fuel Pressure Regulator
- 1600cc secondary fuel injectors with 1100cc
primaries
- Tuned by Danzio Performance
Suspension:
- Stock Front Brakes that have been cross drilled
by 7parts
- Stock Sized Rear Slotted Rotors
- Carbo Tech Panther Plus Brake Pads
- Penskey Triple Adjustable Shocks build by Guy
Ankeny of ARE
- 2 1/4" Hyperco 7" springs: 600lb front/ 800lb rear
- Bogart 3 piece wheels 16 x 12 all four corners
- Hoosier Radial Slicks 25.5x12.5x16 in Front and
27.5x13x16 in
Back
- 7parts tubular adjustable front swaybar
- No rear swaybar
- Fully optimized Suspension with 2.5 inch Front
and 3.5 inch
Rear Roll Centers
Misc:
- 7parts Carbon Fiber
Body
- 7parts Designed and Built Tube Frame Chassis
- Air Jacks
- 7parts Rear Spoiler
- 7parts Lexan Windshield
|
